Product PDFs are provided by request because current official files are not yet available in this library. Always use the latest product label and manufacturer-issued documentation.

MATERIAL SAFETY & EMERGENCY REFERENCE

Safe Handling Starts with the Product Label

Follow the product-specific label and current Safety Data Sheet (SDS). The points below are general reminders, not a replacement for an official SDS or medical advice.

Personal Protective Equipment

Hand protection: Use chemical-resistant gloves appropriate to the product and handling task.
Eye & face protection: Use protective goggles or a face shield where splash exposure is possible.
Respiratory protection: Use protection specified by the product label and risk assessment, including during powder handling or fogging.
Body protection: Use suitable protective clothing and footwear as directed by product instructions.

Emergency First-Aid Reference

Skin contact: Remove contaminated clothing and rinse skin promptly with plenty of water; follow the product SDS.
Eye exposure: Rinse cautiously with clean water and seek urgent medical advice, taking the product label or SDS.
Ingestion / inhalation: Seek emergency medical or poison-control advice immediately. Do not induce vomiting unless a medical professional directs you.
Clinical care: Treatment and antidote decisions belong to qualified medical professionals using the product-specific information.

Request Safety / SDS Documents

INDUSTRIAL SEASONING & APPLICATION GUIDES

Process Overviews

The workflows below are general process summaries. Confirm treatment settings, retention targets, dosage, and handling procedures against current product and plant documentation.

Timber Vacuum Pressure Chemical Seasoning

PLYFLEX™ reference: 500 ml–1 Litre per 99 Litres water.

01Log receiving & moisture inspection
02Tagging & traceability
03Vessel loading
04Initial vacuum
05Preservative solution infusion
06Chemical recovery & final vacuum
07Drip-pad drying

Plywood & Veneer Glue-Line Treatment

PLYFLEX™ reference: 600 ml–1 Litre per 100 kg resin / glue.

01Log peeling & veneer slicing
02Drying & moisture control
03Core assembly & alignment
04Glue-line treatment
05Cold pressing
06High-temperature hot pressing
07Trimming, sanding & quality check

QUICK-REFERENCE B2B DILUTION & DOSAGE MATRIX

Selected Product References

Planning references only. Product labels and current manufacturer-issued directions take precedence.

Product	Category	Application	Dosage reference	Packaging
PLYFLEX™	Wood preservation	Glue-line / dipping	600 ml–1 L / 100 kg resin or 500 ml–1 L / 99 L water	20 L / 200 L
PROMODORA™ TC	Soil anti-termite	Pre/post-construction soil	1% active emulsion; follow product instructions for treatment rate	1 L
BRITALINO™ TC	Soil & timber	Trenching / timber treatment	Follow current product label and technical guidance	1 L
Biflex TC	Wood saturation	Pressure / dip / spray	Refer to product-specific application guide	1 L / 20 L
DHARFOG™ 1.25 ULV	Public health	Thermal / cold ULV fogging	Follow product label and equipment-specific guidance	1 L
TRIFONT™ 50 EC	Larvicide	Stagnant-water treatment	2.5–5 ml per 10 L water	1 L
TRIFONT™ 1% GR	Granular larvicide	Ponds / drains	5–10 kg per hectare of water surface	25 kg
PENTROFILD™ 10 WP	IRS vector control	Indoor residual spray	62.5 g sachet in 10 L water; consult product label for coverage	62.5 g pouch
DHARMEXO GEL™	Cockroach control	Commercial baiting	3–4 gel spots per m², according to product information	140 g box
DHOOFON™ 10 SC	General pest control	Indoor surface spray	15 ml per L water; refer to current product label	1 L

This matrix is a quick reference, not a treatment instruction. Rates, application suitability, pack availability, and precautions may vary by product, site, and label revision.

QUALITY COMPLIANCE & TEST REFERENCES

Product-Specific Documentation

Compliance and testing references relate to the applicable product or manufacturing principal; they are not universal Nexvion-issued certifications.

01 / Reference

ISOQAR / UKAS quality systems

Quality-management references apply to the relevant manufacturing principal and product; request the matching current document.

Request supporting document

02 / Reference

CBRI Roorkee testing reference

Listed in the PLYFLEX™ product information as a Modified Ground Board Test reference.

Request supporting document

03 / Reference

IPIRTI active-ingredient reference

Listed in PLYFLEX™ product information. Confirm the scope against the current supporting documentation.

Request supporting document

Mr. Ajay Mishra

Marketing Head – Pesticide Chemicals

REQUEST CUSTOM DOCUMENTATION & COA

Need a Batch COA or Current MSDS?

Direct technical dispatch and factory-audit documentation support are available for registered B2B clients. Share your product, batch, application, and organization details when requesting documents.

Experience

20+ Years Industry Experience

Primary zones

Gujarat · Rajasthan (Jaipur) · West Bengal · PAN-India

Email ajay.mishra@nexvionherbchem.com Call +91 8796718148